繁體 | English

DVS4004

Product Detail

Audio/Video Coding

Description

Video coding standard

H.264 MP@L3

Audio coding standard

G.711μ

Video Quality Parameter

Description

Video coding system

PAL, NTSC

Image resolution

D1, 4CIF, 2CIF, CIF

Video coding frame rate

Maximum 25 fps (PAL) or 30 fps (NTSC)

Video bit rate

D1/4CIF: 512 Kbit/s - 8192 Kbit/s; 2CIF: 256 Kbit/s - 4096 Kbit/s; CIF: 128 Kbit/s - 1024 Kbit/s

Dual-stream combination

1) H.264 single stream; 2) H.264 + H.264 dual streams

Audio Quality Parameter

Description

Audio bit rate

64 Kbit/s

Audio sampling rate

8 kHz

Sound channel settings

Mono

Mute

Mute can be selected.

Network Feature

Description

Network access mode

Supporting the static IP and PPPoE dialup access modes

Supported network protocols

TCP/IP, UDP, HTTP, IGMP, Telnet, ICMP, ARP, PPPoE, SNMPV2, SIP2.0, and iSCSI

Storage standard

iSCSI

Transmission mode

Unicast and multicast; each channel can be used to transmit 1 channel of multicast stream in real time or 4 channels of unicast streams at the same time, and live stream in the UDP mode and stream in the TCP mode can be transmitted.

End-to-end delay

< 300 ms

Interface

Description

Video input

4 channels of analog composite video input interfaces, BNC interface 75 Ω, 1 V (P-P)

Audio input

4 channels of analog audio input interface (mono), 2 V (P-P), 35 kΩ

Audio output

1 channel of analog audio output interface (mono), 2 V (P-P)

Two-way talking

1 channel of two-way talking interface: independent input channel, which can be used together with the audio channel

Alarm input

4 channels of phoenix terminals, dry contact alarm input interface

Alarm output

2 channels of phoenix terminals, internal relay switched output

Ethernet electrical interface

2 RJ45s; electrical interface; half-duplex/full-duplex Ethernet, supporting 10M/100M/1000M Base-T self-adaptation

Serial port

1 RS-232; 2 RS-485s (1 RJ45 connector and 1 phoenix connector)

USB interface

1 USB2.0

EPON ONU sub-card

1 100 Mbit/s EPON ONU sub-card; sharing the card slot with the SFP interface; the EPON interface card does not support hot swap.

Dual-port SFP Ethernet interface card

Compatible with 2 channels of Ethernet interfaces, IEEE 802.3u 1000Base-X Gigabit Ethernet, not supporting hot swap

Reset button

Restored to the initial setting by holding the button for 3s

Application Feature

Description

Motion detection

Supporting motion detection of 4 zones set at each channel

Transparent channel

Supporting the transparent channel from terminal to terminal or from terminal to IP mode

Web Settings

Description

Basic configuration

Network configuration and serial interface configuration

Management configuration

System settings, server settings, and SNMP settings

Service configuration

Media stream settings

Log management

Log export

System maintenance

Displaying the current device status, configuration management, user management, password management, system restartup, and software upgrade information

Maintenance Management

Description

Debugging mode

Telnet and RS232 serial interface debugging

Update

Supporting local upgrade, Telnet and Web upgrade, and accepting batch upgrade of the central management server

Ambient Characteristic

Description

Dimensions

40 mm × 189 mm × 270 mm

Weight

< 1.5 kg

Operational temperature

–10°C to +60°C

Operational humidity

5% to 95% (no condensation)

Storage temperature

–40°C to +70°C

Storage humidity

5% to 95% (no condensation)

Altitude

–60 m to +4000 m

Operating voltage

External 12 V DC power supply

Maximum power consumption

10 W